Crown Down Implant Case Studies
Real clinical footage of Crown Down 2-drill osteotomies. Different sites, different bone types, the same 2-drill tungsten carbide protocol.
1 min 47 sLower Right #45 & #47 in D1 Bone
Two implants placed side by side in dense D1 cortical bone — the hardest bone class to drill. Watch the 2-drill sequence prepare both sites in two passes each.
Watch the case
1 min 5 s#35 with Autogenous Bone Harvesting
Low-speed carbide drilling preserves the bone particles produced during osteotomy preparation, so they can be collected and used as an autogenous graft in the same appointment.
Watch the case
50 sLower Left Molar #37
A standard 2-drill Crown Down osteotomy at #37: cortical drill first, trabecular drill second, implant seated at controlled depth. The complete sequence in one video.
Watch the caseAbout the protocol
All Crown Down case footage uses the same 2-drill osteotomy protocol — one cortical carbide drill matched to implant diameter, one smaller trabecular drill — at approximately 250 rpm without continuous saline irrigation.